
[tab name="DESCRIPTION"]
Equipped with alnico 5 rod magnets on the lower strings (E,A,D) and alnico 2 rod magnets on the high strings (G,B,E). The split magnets provide punchy bass reponse with well defined attack on the lower registers and thick syrupy vintage tones on the upper register, all the while retaining their "Straty" goodness. The bridge pickup has increased windings for more output and the middle pickup is reversed for humbucking in the 2 and 4 positions.
[tab name="SPECS"]
BRIDGE: 7.0k, CW, North Up
MIDDLE: 6.2k, CCW, South Up
NECK: 6.0k, CW, North Up
DCR TOLERANCE: +/- 5% at 68°F (20°C)
MAGNET GRADE: ALNICO 5/2
POLE SPACING: 2 1/16 inches (52.2 mm)
LEAD WIRES: Push Back Cloth 22 awg
POTTING: Paraffin & Beeswax
HARDWARE: RH Screws & Tube Springs
[tab name="LISTEN"]
Tone tested, built to last, and made from the finest materials available. Every guitar pickup is individually handcrafted and scatter wound with the utmost attention to detail. Completely committed to quality, incredible guitar tone, and most importantly your satisfaction!
Chris Larson
Mr. Fatpups
I'm Chris, and I've loved guitars for as long as I can remember. I got my first guitar when I was 13, over 30 years ago, and I've been hooked ever since. It wasn't long before I started taking them apart and tinkering with them. I even got myself into a little trouble once for completely disassembling my uncle's Strat. Oops!
Over the years, I've worn quite a few hats, working as a guitar teacher, electronics technician, chef, and eventually pickup maker. Through it all, one thing has never changed: my love for guitars and the endless pursuit of great tone.
Today, building pickups is my full-time profession, and I'm proud to be the sole owner and operator of Fatpups. Since 2015, I've handcrafted thousands of pickups for guitarists around the world, and I'm grateful to be doing something I genuinely love.
If you have any questions or there's anything I can help you with, I'd be happy to hear from you!